ATSS has a client in Mobile, AL looking for First Class Carpenters.

Carpenter (First Class)

• Technically proficient in tasks, work processes, and equipment operation.




• Thorough knowledge of equipment and work processes used in marine carpentry, joiner and drydock blocking procedures.




• Must demonstrate ability to interpret and work from supplied drawings, job specifications, instruction manuals, manufacturers handbooks, change orders and contract specifications.




• Accountable for completion of daily work assignments including the completion and signatures for work completion and quality.




• Must have significant knowledge of Marine Carpentry and Joiner work.




• Must be consistently outstanding in attitude, ability and attendance.




• Must be able to operate and maintain all Carpenter Shop equipment, portable power and hand tools.




• Layout, cut, fabricate from blueprints, owner specifications or sketches.




• Works with limited supervision.




• Creates a working environment for compliant with quality, safety, environmental, and health regulations and policies.

• May be assigned to work any shift.




• May be assigned tasks outside craft as required.

Required Carpenter Tool List

1. Allen wrenches, Standard / Metric




2. Apex drill tip holder




3. Sheetmetal tin snips, right/left/ straight




4. Claw hammer, 28oz and 16oz




5. Center punch




6. nail punch




7. Chalk box




8. Cold chisel




9. Crescent wrench, 8"/ 12"




10. Crow bar, long / short




11. Flat bar and pinch bar




12. Framing square, Speed square




13. Hack saw




14. pop rivet gun HD




15. Hole saw knife




16. Nail apron




17. Channel lock pliers, large /small




18. Lineman pliers




19. HD scissors




20. Screw driver, common/Philips, large and small




21. Spring clamps, 4 each




22. Vise grip pliers, 4 each




23. Tape measure, 25'




24. Wrenches 5/16 thru 3/4, metric 10mm thru 18mm




25. 3/8" shocked set, standard / metric




26. Flashlight




27. Insulator trowels, med. To small




28. Utility knife




29. Cordless drill motor, 1/2"

Specific physical requirements include the following:

• Lift/push/pull 50lbs to 100lbs on an occasional basis (0-33% of the day).




• Lift/push/pull up to 20lbs on a frequent basis (34-66% of the day).




• Demonstrate the ability to bend, squat, crouch, crawl, and kneel.




• Demonstrate the ability to climb in a safe manner (climbing includes stairs, scaffolding, ladders, and ramps).




• Perform prolonged standing (2-3-hour intervals).




• Able to work at a variety of levels (ex. waist, eye, above head).




• Demonstrate the ability to safely and appropriately use required tools and equipment.




• Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.




• Possess sufficient handgrip and coordination to carry and operate tools and equipment.




• Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.




• Ability to withstand extreme temperatures (cold and hot).




• Ability to enter 18 x 36 openings and work in confined spaces for prolonged periods of time (33-66% of the day).




• Able to respond to verbal and audible sounds/commands.




• Able to utilize adequate visual skills.




• Ability to work at heights above 12 while working from ladders, scaffolding and/or manlifts.




• Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.




• Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.




• Ability to turn head from side to side and about the vertical axis.

• Ability to turn body at the waist from side to side and about the vertical axis.